Products List
-
big fireclay bottom blocks
Description: Using big vibrating table and adopting special castables, the company produces furnace l...
-
fire clay bricks
Description Fireclay bricks are the most widely used refractories made from clay minerals. It can be ...
Refractory Knowledge
-
The High Temperature Operation and Maintenance Guideline of C
Ceramic fiber products have good high temperature resistance, fire resistance, resistance to oil, aci...
-
Thermal Shock Resistant Fireproof Heat Insulating Brick
Ceramic roller kiln is a new type of energy-saving kiln widely used in recent years with thousands of...
-
Introduction to the performance of clay bricks
Introduction to the performance of clay bricks...
-
The firing temperature of the high alumina brick depends on t
The firing temperature of the high alumina brick depends on the sintering properties of the alumina r...
News Center
-
A Brief Analysis of Boiler Masonry and Its Function
Generally, small boilers are installed quickly and do not need to be built on site. For power plant b...
-
Factory Directly Supply With Popular Refractory Bricks in Ch
The use of kilns is inseparable from refractory bricks, but if the details of refractory bricks are n...
Quality Management of Refractory Brick
1. The quality problem in annular kiln firing
According to the national standard for sintered clay brick, burrs, place brick, black brick, crisp, spiral grain brick, out-of-tolerance size, no complete surface, impurity bulge, lack of edge drop
appearance quality overproof, all act as the unqualified products. Look from the actual situation of some tile enterprises, a lot of nonconforming with burrs and place brick accounting for the
biggest proportion, generally for 1% - 3% of annual production, some villages and towns tile enterprises is as high as 5%. So in the firing process, to ensure product quality tile is crucial, at the
same time, reduce the product cost is also the key to improve enterprise economic benefits.

2. Adobe quality and kiln quality on the influence of firing quality
Wet adobe puts into kiln, one is to increase furnace water vapor content, increase the burning coal consumption. The second is water vapor can be around the body, broken slab billet crib stability,
cause a series of damage. To adopt drying of enterprise is not only caused by kiln collapse and scrap, and cause "obstruction" of the production process.
3. Start from adobe kiln and code quality, improve the quality of burning
Adobe drying quality is to ensure adobe in good condition (no cracks, be affected with damp, endure the cold, etc.), dehydration balance and short drying cycle, it is decided by two aspects, one is
the internal additive as thin agent is right, to reduce dry sensitivity. The second is to strengthen the administration of the drying process, natural drying should pay special attention to the following
points: 1. drying facilities (frame, machine bunds, gutter repairs). 2. Protection facilities (sacks, curtain, etc). 3. Establish perfect operation of the flower, nursing and management discipline. 4. To
carry out the responsibility, limit drying cycle and rejection rate, with rewards and punishment system. Artificial to dry on the basis of optimizing the thermal parameters and scientific management,
to ensure the implementation of the whole system's stability.
If you have any needs our help or are interested in our products, you can click online advisorychat with us online, or call our customer service telephone: 0086-0371-63838939. We will sincerely serve for you!