Products List
-
big fireclay bottom blocks
Description: Using big vibrating table and adopting special castables, the company produces furnace l...
-
fire clay bricks
Description Fireclay bricks are the most widely used refractories made from clay minerals. It can be ...
Refractory Knowledge
-
Mullite insulation brick
The mullite insulation brick is a high alumina refractory material mainly composed of mullite (3Al2O3...
-
The Development of Refractory Brick
In recent 20 years, due to the implementation of large-scale blast furnace in iron and steel industry...
-
Silicone brick tips
Silica bricks are acidic refractory materials, strong resistance to acid slag corrosion, and its ther...
-
Brief analysis of porosity and water absorption of refractori
What is the definition of the porosity of refractory materials and what is the basis for determinatio...
News Center
-
A Brief Analysis of Boiler Masonry and Its Function
Generally, small boilers are installed quickly and do not need to be built on site. For power plant b...
-
Factory Directly Supply With Popular Refractory Bricks in Ch
The use of kilns is inseparable from refractory bricks, but if the details of refractory bricks are n...
The production process of Refractory Materials
products.
The production process of generally block burned into refractory brick:
1. Raw materials
Make different refractory products, need to adopt different chemical mineral composition of raw materials.
Refractory products demand for raw materials are: suitable chemical mineral composition and content of impurities in raw material: fewer and uniform distribution. Facilitate mining processing
and manufacturing, and lower cost.
2. The raw material processing
Raw material processing including mineral separation, drying, burning, crushing and screening.

3. Ingredients and mix practice (mixed)
Ingredients are the raw materials (large, medium and small three kinds of particles, raw material and clinker), additive (binder, mineralizer) and water to coordinate according to certain proportion.
4. Molding and drying
The purpose of molding is to make the refractory products with specification density, appearance size and strength. Molding methods can be divided into new moon and semi-dry forming.
Metallurgical industry to use the most is the half dry molding in refractory products.
If you have any needs our help or are interested in our products, you can click online advisorychat with us online, or call our customer service telephone: 0086-0371-63838939. We will sincerely serve for you!














